Legal notice

Issued by ewm-group.com

EWM HIGHTEC WELDING GmbH
Dr. Günter-Henle-Straße 8
56271 Mündersbach
Germany

Phone: +49 26 80 / 1 81 - 0
Fax: +49 26 80 / 1 81 - 244

Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Commercial register
Montabaur District Court, HRB 1171

VAT number
DE 155190423 

Managing Director
Bernd Szczesny – Company management spokesman
Michael Szczesny
Susanne Szczesny-Oßing

 

Concept, design and development

HEAD. MARKETING-PARTNER

 

Disclaimer

1. Content of online information
The author reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided. The author cannot be held liable for any damage or loss of a material or non-material nature resulting from the use or non-use of the information provided or from the use of incorrect or incomplete information, except in the case of demonstrable intent/gross negligence on the part of the author. All content is without obligation and non-binding. The author explicitly reserves the right to modify, supplement or delete some of the pages or the entire content without providing separate notification, or stop publication thereof temporarily or indefinitely.

2. References and links
In the event of direct or indirect links to external web sites ("hyperlinks") that are outside the scope of responsibility of the author, responsibility for illegal content cannot be accepted unless the author had knowledge of the content and it was technically possible and reasonable for him to prevent visitors to the site from viewing those pages.
The author hereby explicitly declares that he was not aware of any illegal content on the linked sites when the links were installed. The author has no influence whatsoever on the current or future design, the content or the authorship of the web sites to which links are provided. For this reason the author explicitly distances himself from the content of all linked sites that have been modified after the links were installed. The same also applies to all links and references within the author's own Internet content, and external entries in visitor books, discussion forums, link lists, mailing lists or any other type of database provided by the author to which external write access is possible. The provider of the site to which reference is made is solely responsible for illegal, incorrect or incomplete content, particularly for damage caused by the use or non-use of such information, not the person who merely refers to the respective publication via links.

3. Copyright and trade mark law
The author has endeavoured not to use copyrighted images, diagrams, sounds, video sequences and texts and use his own material or freeware.
All brand names and trademarks that are mentioned in the web site content and may be protected by third parties are unrestrictedly subject to the conditions of the applicable trademark law and the ownership rights of the owner(s) thereof. It cannot be assumed that trademarks are not protected by the rights of third parties just because this is stated!
The copyright for published objects that the author has created himself belongs exclusively to the author of the web site. The duplication or use of such diagrams, sounds, video sequences and texts in other electronic or printed publications is not permitted without the explicit approval of the author.

4. Data protection
If it is possible to enter personal or business information (e-mail addresses, names, addresses) within the web site, this information is provided by the user voluntarily. The use of and payment for all of the services that are provided are also permitted without entering such information or by entering anonymous information or an alias (if technically possible and reasonable). Contact data such as mailing addresses, telephone numbers, fax numbers and e-mail addresses that appear in the legal information or similar information must not be used by third parties to send unsolicited information. The right is reserved to take legal action against the senders of so-called spam mails.

5. Legal validity of this disclaimer
This disclaimer must be considered to be a constituent of the Internet content from which this page was referred to. If parts of this text or individual terms therein are illegal, no longer legal or not entirely legal, the content and validity of the other parts of the document are unaffected.

 

tn_pm-10-11-abb2

EWM opens its own factory
in China

A new expert centre that features every
aspect of state-of-the-art welding devices and
process technologies, services and training 

 

Read more...

tn_azubis-2010-gruppe-1-img_1611-lowNew trainees 2010/20

8 new trainees embarked on their careers
on 2 August 2010

  Read more...
tn_messe_1004

EWM at the EuroBLECH

26. to 30 October 2010
Hanover Fair, Hall 13, Stand D40

Read more...

pm_10_07_abb6bReference customer alwitra -
automated aluminium welding

"Our power source/robot team does
just what we demand of it – shift after shift."
 

Read more...

Picomig180_SetPicomig 180 puls –
Multi-talented

Five fully-fledged welding processes in one machine –
and all this with a weight of only 15 kg!

Read more...
tn_Ref_Calbe

Unparalleled power

"No machine on the market generates an arc that is
as powerful and exceptionally directionally stable"
Read more...
tn_pm_10_02_abb-10

Giants make the world
go round

Problem solved! The reliable welding process is
the decisive factor at Liebherr

 

Read more...
tn_Plauen_Stahl

Premium quality makes a
world leader

Plauen Stahl – EWM’s process innovative forceArc®
transforms the very nature of welding

 

Read more...
EWM_Referenzen_forceArc

New reference customer brochures

Discover how well-respected companies use EWM
welding technology to achieve high-quality results.
Read more...